Cadillac 2011 SRX User Manual download pdf (Page 67)

Black plate (5,1)

Cadillac SRX Owner Manual - 2011

Seats and Restraints 3-5

Memory Seats

On vehicles with the memory

feature, the “1” and “2” buttons

on the outboard side of the driver

seat are used to manually save

and recall the positions of the driver

seat, outside mirrors, and adjustable

throttle and brake pedal positions,

if available. These manually stored

positions are referred to as Button

Memory positions.

The vehicle will also automatically

save driver seat, outside mirror,

and adjustable throttle and brake

pedal positions to the current driver

Remote Keyless Entry (RKE)

transmitter when the ignition is

turned off. These automatically

stored positions are referred

to as RKE Memory positions.

See Remote Keyless Entry (RKE)

System Operation on page 2‑4

for more information.

Storing Button Memory Positions

To save positions into Button

Memory:

1. Adjust the driver seat,

seatback recliner, both

outside mirrors, and adjustable

pedals, if available, to the

desired driving positions.

2. Press and release the

MEM (Memory) button.

3. Press “1” until a beep sounds.

4. Repeat Steps 1 through 3 for a

second driver using “2.”

Recalling Button Memory

Positions

To recall the manually saved

Button Memory positions, press

and hold “1” or “2.” The driver seat,

outside mirrors, and adjustable

pedals, if available, move to the

positions stored to those buttons

when pressed. Releasing “1” or “2”

before the stored positions are

reached stops the recall.

If something has blocked the

driver seat and/or the adjustable

pedals, if available, while recalling

a memory position, the recall may

stop. Remove the obstruction; then

press and hold the appropriate

manual control for the memory item

that is not recalling for two seconds.

Try recalling the memory position

again by pressing the appropriate

memory button. If the memory

position is still not recalling, see

your dealer for service.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 501 502

Comments to this Manuals

No comments