Cadillac 2011 SRX User Manual download pdf (Page 121)

Black plate (59,1)

Cadillac SRX Owner Manual - 2011

Seats and Restraints 3-59

{

WARNING

Children can be seriously injured

or strangled if a shoulder belt

is wrapped around their neck

and the safety belt continues to

tighten. Buckle any unused safety

belts behind the child restraint so

children cannot reach them. Pull

the shoulder belt all the way out

of the retractor to set the lock,

if the vehicle has one, after the

child restraint has been installed.

Notice: Do not let the LATCH

attachments rub against the

vehicle’s safety belts. This may

damage these parts. If necessary,

move buckled safety belts to

avoid rubbing the LATCH

attachments.

Do not fold the empty rear seat

with a safety belt buckled. This

could damage the safety belt or

the seat. Unbuckle and return the

safety belt to its stowed position,

before folding the seat.

Make sure to attach the child

restraint at the proper anchor

location.

This system is designed to make

installation of child restraints easier.

When using lower anchors, do

not use the vehicle's safety belts.

Instead use the vehicle's anchors

and child restraint attachments

to secure the restraints. Some

restraints also use another vehicle

anchor to secure a top tether.

1. Attach and tighten the

lower attachments to the

lower anchors. If the child

restraint does not have lower

attachments or the desired

seating position does not have

lower anchors, secure the child

restraint with the top tether and

the safety belts. Refer to your

child restraint manufacturer

instructions and the instructions

in this manual.

1.1. Find the lower anchors

for the desired seating

position.

1.2. Put the child restraint on

the seat.

For the outboard rear

seating positions, if the

head restraint interferes

with the proper installation

of the child restraint,

the head restraint may

be removed. See “Head

Restraint Removal and

Reinstallation” at the end

of this section.

1.3. Attach and tighten the lower

attachments on the child

restraint to the lower

anchors.

2. If the child restraint manufacturer

recommends that the top tether

be attached, attach and tighten

the top tether to the top tether

anchor, if equipped. Refer to the

child restraint instructions and

the following steps:

2.1. Find the top tether anchor

and open its cover to

expose the anchor.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 501 502

Comments to this Manuals

No comments