Cadillac 2010 Escalade User Manual download pdf (Page 482)

100

101

Black plate (34,1)

Cadillac Escalade/Escalade ESV Owner Manual - 2010

4. With the coolant surge tank pressure cap off, start

the engine and let it run until you can feel the

upper radiator hose getting hot. Watch out for the

engine cooling fan.

By this time, the coolant level inside the coolant

surge tank may be lower. If the level is lower, add

more of the proper mixture to the coolant surge

tank until the level reaches the FULL COLD mark.

5. Replace the pressure cap. Be sure the pressure

cap is hand-tight and fully seated.

6. Verify coolant level after engine is shut off and the

coolant is cold. If necessary, repeat coolant fill

procedure Steps 1 through 6.

Notice: If the pressure cap is not tightly installed,

coolant loss and possible engine damage may

occur. Be sure the cap is properly and tightly

secured.

Engine Overheating

The vehicle has several indicators to warn of engine

overheating.

There is a coolant temperature gauge on your vehicle's

instrument panel. See Engine Coolant Temperature

Gauge on page 4‑35.

In addition, ENGINE OVERHEATED STOP ENGINE,

ENGINE OVERHEATED IDLE ENGINE, and a ENGINE

POWER IS REDUCED message comes on in the Driver

Information Center (DIC) on the instrument panel. See

DIC Warnings and Messages on page 4‑49.

You may decide not to lift the hood when this warning

appears, but instead get service help right away. See

Roadside Service on page 9‑8.

7-34

1 2 ... 477 478 479 480 481 482 483 484 485 486 487 ... 619 620

Comments to this Manuals

No comments

Cadillac 2010 Escalade User Manual Page 482

Comments to this Manuals

Related products and manuals for Cars Cadillac 2010 Escalade