Cadillac 2008 escalade esv Operations Instructions Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
E S C A L A D E / E S C A L A D E E S V
signal/multifunction lever is in the
low beam position.
To turn off the system, press the
(On/Off) button on the inside
rearview mirror for three seconds.
Press the button again to turn the
system back on.
AUTOMATIC HEADLAMP SYSTEM
Your vehicle is equipped with an
Automatic Headlamp System, which
automatically turns on the Daytime
Running Lamps (DRL) during the day
and the headlamps and other exterior
lamps at night or when necessary.
The system uses a light sensor,
located on top of the instrument
panel, to determine light conditions.
For proper system operation, avoid
placing any objects on or near
the sensor.
Exterior Lamp Controls
The exterior lamps also can be
operated manually using the control
knob located on the left side of the
instrument panel. The knob can be
rotated to the following positions:
(Off): Turns off the Automatic
Headlamp System, including the
Daytime Running Lamps.
AUTO (Automatic Mode): Turns on
the Automatic Headlamp System at
night or when necessary.
(Parking Lamps): Turns on the
parking lamps and taillamps.
(Headlamps): Turns on the
headlamps and other exterior lamps.
Additional lamp controls include:
DOME OFF: When this button is
pressed in, the dome lamps will be
turned off. When the button is out,
the dome lamps will turn on
automatically when the doors
are open.
(Instrument Panel Brightness):
Turn this knob to adjust the
brightness of the instrument
panel lights.
(Fog Lamps): Press this button to
turn the fog lamps on or off.
CRUISE CONTROL
The cruise control
buttons are
located on the
steering wheel.
(On/Off): Press
this button to turn
the cruise control
system on or off.
SET (Set): Press
this button to set a
speed, or to
decrease the speed
if the system is set.
Tapping the button decreases the
speed in one-mph increments. When
the cruise control speed is set, the
cruise light will illuminate in the
instrument cluster.
+ RES (Resume): Press this button to
resume a set speed, or to increase
the speed if the system is set.
Tapping the button increases the
speed in 1 mph (1.6 km/h) increments.
(Cancel): Press this button to
cancel the cruise control but retain
the set speed in memory.
76885_08a_Escalade_ESV_052407.qxd:Escalade_ESV 2007 A 5/24/07 2:32 PM Page 16
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments