Cadillac 2007 CTS User Manual download pdf (Page 386)

7. Locate the vertical headlamp aiming screws,

which are under the hood near each headlamp

assembly.

The adjustment screw can be turned with a

6 mm hex socket.

8. Turn the vertical aiming screw until the

headlamp beam is aimed to the horizontal tape

line. If you turn it clockwise, it will raise the

beam and if you turn it counterclockwise, it will

lower the beam.

The top edge of the cut-off should be

positioned at the bottom edge of the horizontal

tape line.

9. Make sure that the light from the headlamp is

positioned at the bottom edge of the horizontal

tape line. The lamp on the left (A) shows

the correct headlamp aim. The lamp on the

right (B) shows the incorrect headlamp aim.

10. Repeat Steps 7 through 9 for the opposite

headlamp.

Passenger’s Side Shown

386

1 2 ... 381 382 383 384 385 386 387 388 389 390 391 ... 517 518

Comments to this Manuals

No comments