Cadillac 2011 SRX User Manual Page 382

  • Download
  • Add to my manuals
  • Print
  • Page
    / 498
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 381
Black plate (44,1)
Cadillac SRX Owner Manual - 2011
10-44 Vehicle Care
8. Press a new bulb/socket into the
taillamp assembly and turn the
bulb/socket clockwise until it
clicks.
9. Reinstall the taillamp assembly
and tighten the screws.
10. Reinstall the taillamp cover by
snapping it into place.
11. Push the push pin to secure
the taillamp cover.
License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
(Manual) on page 214 or
Liftgate (Power) on page 215
for more information.
Passenger side shown, driver side
similar
2. Push the left end of the lamp
assembly towards the right.
3. Turn the lamp assembly down to
remove from liftgate.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
4. Turn the bulb socket (A)
counterclockwise to remove
from lamp assembly (C).
5. Pull the bulb (B) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install into lamp assembly.
Page view 381
1 2 ... 377 378 379 380 381 382 383 384 385 386 387 ... 497 498

Comments to this Manuals

No comments