Cadillac 2011 DTS User Manual Page 347

  • Download
  • Add to my manuals
  • Print
  • Page
    / 464
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 346
Black plate (45,1)
Cadillac DTS Owner Manual - 2011
7. Locate the vertical headlamp aiming screws. They
are located under the hood near each headlamp
assembly. First lift the flap to access either of
them. Each one is the top outboard screw by the
V on the cover panel next to the aiming flap.
The adjustment screw can be turned with a 6 mm
hex wrench.
8. Turn the vertical aiming screw until the headlamp
beam is aimed to the horizontal tape line. Turn it
clockwise or counterclockwise to raise or lower the
angle of the beam.
The top edge of the cut-off should be positioned at
the bottom edge of the horizontal tape line.
9. Make sure that the light from the headlamp is
positioned at the bottom edge of the horizontal
tape line. The lamp on the left (A) shows the
correct headlamp aim. The lamp on the right (B)
shows the incorrect headlamp aim.
10. Repeat Steps 7 through 9 for the opposite
headlamp.
6-45
Page view 346
1 2 ... 342 343 344 345 346 347 348 349 350 351 352 ... 463 464

Comments to this Manuals

No comments