Cadillac 2007 CTS User Manual download pdf (Page 145)

Programming Universal Home

Remote — Rolling Code

Rolling code garage door openers are used for

garage doors produced after 1996 and are

code protected. Rolling code means the coded

signal is changed every time your remote control

garage door opener is used.

Programming a rolling code garage door opener

involves time-sensitive actions, so read the

entire procedure before you begin. If you do not

follow these actions, the device will time out

and you will have to repeat the procedure.

Follow these steps to program up to

three channels:

1. Press the two outside buttons at the same

time for one to two seconds, and immediately

release them.

2. Go to the garage. Locate the garage door

motor head and press and release the

“learn” button.

After pressing the “learn” button, you

have 10 to 30 seconds to complete Step 4

depending on your garage control unit. If you

cannot locate the “learn” button, refer to

the owners guide for your garage door opener.

145

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 517 518

Comments to this Manuals

No comments