Cadillac 2005 STS Specifications download pdf (Page 333)

100

101

8. Now connect the black negative (−) cable to the

negative terminal of the good battery. Use a

remote negative (−) terminal if the vehicle has one.

Do not let the other end touch anything until the

next step. The other end of the negative (−) cable

does not go to the dead battery. It goes to a

heavy, unpainted metal engine part or to a remote

negative (−) terminal on the vehicle with the

dead battery.

9. Connect the other end of the negative (−) cable at

least 18 inches (45 cm) away from the dead battery,

but not near engine parts that move. The electrical

connection is just as good there, and the chance

of sparks getting back to the battery is much less.

Use a remote negative (−) terminal if the vehicle has

one. Your vehicle’s remote negative (−) ground

location is for this purpose.

10. Now start the vehicle with the good battery and run

the engine for a while.

11. Try to start the vehicle that had the dead battery.

If it will not start after a few tries, it probably needs

service.

Notice: If the jumper cables are removed in the

wrong order, electrical shorting may occur and

damage the vehicle. The repairs would not be

covered by your warranty. Remove the jumper

cables in the correct order, making sure that the

cables do not touch each other or other metal.

A. Heavy, Unpainted Metal Engine Part or Remote

Negative (−) Terminal

B. Good Battery or Remote Positive (+) Terminal

C. Dead Battery or Remote Positive (+) Terminal

Jumper Cable Removal

5-43

1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 437 438

Comments to this Manuals

No comments

Cadillac 2005 STS Specifications Page 333

Comments to this Manuals

Related products and manuals for Car alarm Cadillac 2005 STS

Související produkty a manuály pro Elektrické nářadí Craftsman 351.216120